Publicité
Les langues disponibles
Les langues disponibles
LAMINATOR CONTROLS
C
D
QUICK START GUIDE
2
3
1
5
6
7
READY
READY
READY
POWER
POWER
POWER
POWER
9
10
3
M5-95_407894B_NA_A5_092614.indd 3-5
ENGLISH
E
LAMINATOR CONTROLS
A
On / off switch
B
Ready LED (Green)
E
C
Release lever (
)
B
CAPABILITIES
F
Performance
Format
9.5" / 240mm
Entry width
A4 = 240mm
A
Pouch thickness
3-5 mil
Warm up time (estimate)
4 minutes
Lamination speed
approx. 12"/min
(+/- 5%)
(fixed speed)
Number of rollers
2
Ready indication
Light (Green)
4
Release lever
Yes
Auto Shut Off
Yes
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power
8
cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before
final laminations.
DO remove staples and other metal articles prior to
laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended
period.
DO use pouches designed for use at the appropriate
settings.
DO keep away from pets, while in use.
4
FEATURES & TIPS
D
Pouch / document entry slot
E
Pouch / document exit
F
Power on LED (Red)
Auto
Shut
Technical Data
Off
Voltage / Frequency /
Current(Amps)
120V AC, 60Hz, 2.5A
Wattage
300 Watts
Dimensions (HxWxD)
2 5/8" x 14" x 6 1/4"
Net weight
3lb
SETTING UP THE LAMINATOR
Max document thickness
(laminating capacity)
0.02" / 0.4 mm
1.
Ensure the machine is on a stable surface.
2.
Check there is enough clear space (min 20") behind
the machine to allow items to pass through freely.
HOW TO LAMINATE
4.
Switch the power on (located at the side of the
machine).
5.
The red 'Power on' lamp will light up. The machine is
now heating up.
DO NOT leave the power cord in contact with hot
6.
When the machine is ready, the green 'Ready' lamp
surfaces.
will remain on.
DO NOT leave power cord hanging from cupboards or
shelves.
7.
Place the document into the open pouch. Ensure the
DO NOT use appliance if the power cord is damaged.
document is centered against the sealed edge. Use
the appropriate pouch size for the document.
DO NOT attempt to open or otherwise repair the
machine.
DO NOT exceed the machines quoted performance.
NEED HELP?
DO NOT allow children to use this machine without adult
supervision.
Let our experts help you with a solution.
DO NOT laminate sharp or metal objects (eg: staples,
Customer Service...
paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets,
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
ultrasounds etc) on hot settings.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
DO NOT laminate with self-adhesive pouches on hot
settings.
DO NOT laminate an empty pouch.
'Release' function
•
For best results, use Fellowes ® brand pouches:
To remove or re-align a pouch during
3-5 mil.
lamination, activate the release lever
•
This machine does not need a carrier to laminate.
located on the back of the machine. The
It is a carrier-free mechanism.
pouch can only be removed from the
•
Always put the item to be laminated into the ap-
entry slot when the lever is activated.
propriate sized pouch.
•
Always test laminate with a similar size and thick-
Auto Shut Off
ness before final process.
After 30 minutes, the machine will
•
Prepare pouch and item for lamination. Place item
automatically go in to Auto Shut Off
within pouch centered and touching the leading
mode. The Power LED will flash red for
sealed edge. Ensure the pouch is not too large for
5 minutes and then turn off. The ready
the item.
LED will turn off. To continue using the
•
If required, trim excess material from around the
machine press the ON/OFF switch. The
item after lamination and cooling.
machine will reset itself.
3.
Plug the machine into an easily accessible main
socket.
8.
Ensure the pouch enters the machine sealed edge
first. Keep the pouch straight and central within the
slot, not on an angle. Use the entry markings as a
guide.
9.
Upon exit, the laminated pouch may be hot and soft.
To prevent jamming remove the pouch immediately.
Place pouch on to a flat surface to cool. Take care
when handling a hot pouch.
10.
To release a pouch during lamination, activate the
release lever located on the back of the machine.
Gently pull pouch out of machine.
www.fellowes.com
5
9/30/14 3:38 PM
Publicité
