Akasa integral P2NSX Mode D'emploi page 4

4. Gently insert the tray back into housing until the back fits against the housing.
NOTE: Aligning the HDD tray with guide rails.
5. Secure the enclosure face plate to the enclosure using the screws provided.
6. You are now ready to connect your SATA .5" enclosure to the system.
Choose the connection you want to use (USB or eSATA) and move to the corresponding chapter of the
manual for further instructions.
NOTE: Do not connect both (USB and eSATA) cables at the same time.
ESATA
5
HDD Installatio
DC5V
USB CONNECTION
Connecting the Integral SATA (USB mode)
1. Connect one of the two Type A connectors of the USB-to-DC cable to any available active USB
port on the PC / MAC.
2. Connect the other end of the USB-to-DC cable into the DC 5V port of your Integral SATA
enclosure. The LED integral logo should light on.
3. Connect one end of the USB-Data cable to any available active USB port on the PC / MAC and
the other end to the USB port of your Integral SATA enclosure.
4. Let Windows / MAC search and install the
driver automatically.
Windows-
open "My Computer" or
"Computer" to see the icon of the
external hard drive ready to use.
USB Connection
6