Akasa integral P2NSX Mode D'emploi page 3

SPECIFICATIONS
• Internal interface: Serial ATA I / II
• External interface: eSATA, USB.0 (. backward compatible)
• Transfer rates: up to 480Mb/s on USB .0 and up to 3.0Gb/s on eSATA
• Power on indicator: Blue-LED Integral logo
• Case material: Aluminum
• Weight: 30g (without a HDD)
• Dimensions: 35mm (L) x 80mm (W) x mm (H)
• Power requirements: 5V, 0.5-.0A (DC)
o
• Operating Temperatures: 5 to 50 C
o
• Storage Temperatures: -40 to 70 C
• Operating Humidity: 5 to 90%, non-condensing
SYSTEM REQUIREMENT
PC Requirements
• Minimum Intel Processor Pentium II 350MHz, 64MB RAM
• Windows 000 / XP / VISTA / 7
• Active USB or eSATA port
MAC Requirements
• Minimum Apple G3 processor, 64MB RAM
• Mac OS 9., 9., 0..5, 0., 0.3
• Active USB or eSATA port
BACK PANEL ARRAGEMENT
ESATA
eSATA port USB Port
3
DC5V
DC 5V Power Input
Hard Disk Installation
. Open the back of the enclosure by undoing the securing screws and sliding the tray out of the
aluminum housing.
2. Place the HDD on the tray, line-up the connectors with the drive and gently insert the HDD
into the tray's connector until the connection is secure.
3. While supporting the HDD with your hand, gently turn the tray over and locate the HDD
mounting holes. Use the four screws supplied in the mounting kit to secure the HDD to the
tray.
HDD Installation
SATA connectors
4