EarthWise PW190002 Manuel De L'utilisateur page 5

UNPACKING
This product requires assembly.
Carefully remove everything from the box. Make sure that
all items listed in the packing list are included.
Inspect all items carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
pressure washer.
PACKING LIST
- Pressure Washer
- Gun & Lance with Adjustable Nozzle
- Detergent Bottle
- Gun Holder, Power Cable Hook and Connector
- Owner's Manual ( with nozzle cleaning pin attached &
Hardware Bag)
- Accessory Holder
- Wheels
- Handle
TO SET UP PRESSURE WASHER (Fig 1 - Fig 7)

Install gun holder and power cord hook onto the
pressure washer by following the arrow direction as
shown below.

Align the wheels on each side with the slots on the unit,
and push them inwards to lock the wheels in place.

Line up the holes on accessory holder with holes on
the unit. And use a screwdriver to secure two provided
screws by turning clockwise. ( Fig. 1)

Screw the handle tightly onto the main body.( Fig. 2)
ASSEMBLY
Fig. 1
Fig. 2
5
PW190002

Attach the high pressure hose to the pressure water
outlet of the machine. ( Fig. 3)
NOTE: Push button to remove the hose.

Insert High/Low pressure spray lance into gun, push
them together and at the same time twist clockwise to
lock in place.

Remove the connected gun and spray lance by
twisting it counter-clockwise, and then pull them apart.
( Fig. 4)
NOTE: The gun sliding button for rotary function should
be in lock position before connecting High/Low pressure
lance to spray gun, or the High/Low pressure spray lance
will rotate meanwhile. Please review " locking " method
as shown below.

Insert the high pressure hose into gun handle directly
and make sure it is firmly connected. Push hose
release button and pull downward on hose to
disconnect. ( Fig. 5)
Fig. 3
Fig. 4
Fig. 5