Axis 292 Guide D'installation page 7

AXIS 292 Installation Guide
Manual Installation using AXIS IP Utility
AXIS IP Utility is a Windows software application that installs the AXIS 292 to the local
network using a static IP address.
• Download the AXIS IP Utility software, free of charge, from the Support pages at
http://www.axis.com/techsup
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button
number and IP address for the Product shortname. The serial number is located on the
product label.
Click the Assign button and follow the instructions.
3.
4. Click the Home Page button to access the camera's web pages.
5. Enter a password for the root user (administrator). See Setting the password, on page 6.
6. The installation is now complete. Proceed to Accessing the AXIS 292, on page 10.
Note:
If the password is lost, the AXIS 292 must be reset to the default settings. Refer to Factory
default settings, on page 11, for instructions.
Assign new IP address using serial number and enter the serial
Page 7