Axis 292 Guide D'installation page 11

AXIS 292 Installation Guide
Factory default settings
Follow the instructions below to reinstate the product factory default settings using the
Control button:
1. Disconnect power from the AXIS 292.
2. Press and keep the Control button pressed and reconnect power.
3. Keep the Control button pressed until the Status Indicator displays steady amber (this
may take up to 15 seconds).
4. Release the Control button. When the Status Indicator displays green (which can take up
to several minutes), the AXIS 292 will then have been reset to its original factory default
settings.
5. Re-assign the IP address using one of the methods described in this document.
The default user name is root and the default password is pass. The password should be
6.
changed to prevent unauthorized tampering.
Further information
For more information, please refer to the AXIS 292 User's Manual which is available from the
Axis Web site at www.axis.com or from the Axis Network Product CD supplied with this
product.
Page 11