4
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free . Please have
your Owner's Manual and model number available for
reference .
Note: The model number can be found on the back or side of the grill .
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that's free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak Detection Solution (instructions on how to make
solution are included in "Operating Instructions" section) .
• (1) 14 .1 oz or (1) 16 .4 oz LP gas tank .
Typical assembly is approximately 30 minutes .
3
Attach Tool Holder and Side Handle
A
x 2
B
x 2
Outdoor LP Gas Barbecue Grill
Model No. GTC1205B
2
Attach Lid Handle and Top Hinges
B
x 4
D
E
x 10
4
Attach Axle, Wheels and Hub Caps
C
x 2
F
x 4
x 6
G
x 6
H
x 2