Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLE AND REMOVE CANOPY:
1. Lift off seat cover from seat bottom
A
.
2. Lift off cover from rear back rest
lock
B
.
3. Press in both lock buttons fully
while pulling up on back rest.
4. Press in both side support lock
D
buttons
while pulling up on
Canopy assembly.
5. Remove back lower support by
removing both lock knobs
6. Put hardware in small bag and keep
with Canopy.
7. To INSTALL Canopy follow these
steps in reverse order.
OPENING SIDE SUPPORT: To open
safety bracket when placing child
into trike, push back center support
covering and press lock button
and swing side support open.
CAUTION:
When snapping safety
bracket closed make sure button
snaps firmly locked. Gently pull on
side support to make sure it does not
come loose.
Assembly
C
F
E
.
F
IN
F
B
E
D
A
C
E
7
Publicité
