C
A
B
4
Parts Assembly
PHONE/TABLET HOLDER (IF EQUIPPED):
B
1. Install the phone/tablet holder around the handlebar
using rubber spacers
clamp knob
2. Place the phone/tablet in the holder and tighten the
C
clamp
A
BOTTLE HOLDER (if equipped):
1. Install by sliding bottle holder down into slotted mount
A
until it snaps locked.
2. Remove by pressing back tab
holder up.
CAUTION:
A
as needed. Securely tighten with
B
.
firmly so that it does not come loose.
B
Do NOT carry hot liquids in bottle holder.
and pulling bottle