Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.1 Attaching the tensioning straps
These tensioning straps may only be used to wrap or bundle
objects. They are not suitable as tie-downs for a load since
they are only fitted with a clamping lock.
Wrap the strap around the objects. Make sure that the strap is not
twisted. To close the strap, push the lever on the top of the lock down
and guide the loose end of the strap, from below, through the lock. Then
release the lever. Tension the strap by holding the part with the clamping
lock in one hand and use the other hand to pull the loose section in the
opposite direction through the lock.
Release the tensioning strap by pushing down on the lever and holding.
Pull the loose end out of the lock.
6. Storage and maintenance
6.1 Storage
•
Only store the straps in dry, lightly heated spaces.
•
Protect from major sunlight.
•
Do not dry or store the strap in the vicinity of fire, radiators, heating
pipes or other locations with extreme temperatures.
•
Never store with chemicals.
6.2 Maintenance
Maintenance work may only be carried out by the manufacturer or
persons named by the manufacturer.
7. Notes regarding environmental protection
Please dispose of the tensioning straps via the recycling bin or the
public/municipal collection points.
The materials are recyclable. You make an important contribution to
protecting our environment by recycling, material utilisation or other
forms of reusing waste equipment!
8. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5
Publicité
Table des Matières
