Tensioning strap with clamping closure
CONTENTS
1. Proper use of the product
2. Scope of delivery
3. Specifications
4. Safety precautions
4.1 Monitoring
4.2 Withdrawal from use
5. Operating instructions
5.1 Attaching the tensioning straps
6. Storage and maintenance
6.1 Storage
6.2 Maintenance
7. Notes regarding environmental protection
8. Contact information
WARNING
Please read the operating instructions carefully prior to use
and observe all safety instructions!
Not observing such may lead to personal injury, damage to
the device or to your property!
Store the original packaging, the receipt and these
instructions so that they may be consulted at a later date!
When passing on the product, please include these
operating instructions as well.
Please check the contents of package for integrity and
completeness prior to use!
1. Proper use of the product
These tensioning straps may only be used to wrap or bundle objects.
They are not suitable for load securing or tie-downs for a load since they
are only fitted with a clamping lock. Never use to lift loads! Observe the
lashing specifications on the strap!
The straps are not designed for commercial use.
This device is not designed to be used by children or persons with limited
mental abilities or without experience and/or lack of required specialist
knowledge. Keep children away from the device.
Utilisation according to the intended purpose also includes the
observance of all information in these operating instructions,
particularly the observance of the safety instructions. Any other
utilisation is considered to be contrary to the intended purpose and may
lead to material damage or personal injuries. EAL GmbH assumes no
liability for damage resulting from improper use.
2. Scope of delivery
1 x Tensioning strap 1-piece with clamping lock
1 x Operating instructions
3. Specifications
Lashing force, LC: 250 daN
Material:
PP
Length:
L G : 3 m
Width:
25 mm
4
(in round)
4. Safety precautions
• The warning triangle indicates all instructions which are
4
important for safety. Always follow these otherwise you
4
could injure yourself or damage the device.
4
• Children may not play with the device.
4
• Cleaning and user maintenance may not be carried out by
5
children without supervision.
5
• Do not treat packaging material carelessly. This may become a
5
dangerous plaything for a child!
5
• Only use this product for its designated purpose!
5
• Do not manipulate or disassemble the device!
5
• For your own safety, only use accessories and spare parts that
5
are stated in these instructions or that are recommended by
5
the manufacturer!
5
4.1 Monitoring
•
Before using, check the tensioning strap for potential damages. In
the event of damage to the strap or the metal parts, immediately
cease to use the tensioning strap.
•
Lashing straps contaminated with aggressive or other substances
must be examined carefully and checked as required. The use of
such can be dangerous.
•
The lashing straps and components are to be checked at least
once a year by a specialist. Depending on the conditions of use, an
additional check may be required.
4.2 Withdrawal from use
The tensioning strap may no longer be used in the event of:
•
Thread breaks and cuts, especially when caused by sharp edges
•
Missing or no longer legible labelling
•
Damage to the connection
•
Damage or deformation due to the effects of heat
•
Damages caused by aggressive substances
5. Operating instructions
These straps are not suitable for lifting and carrying loads.
•
Permitted lashing force: 250 daN.
•
Do not tension the strap over sharp corners or edges.
•
Lashing straps may not be twisted and the full width must make
contact.
•
No loads may be placed on top of the tensioning strap.
•
The strap may not be positioned up against a hot surface.
•
The tensioning strap may only be used between temperatures of
-40 °C and +90 °C.
•
When using polyamide of polyester tensioning straps,
contaminations may be removed using ordinary solvents. The
tensioning strap must be allowed to dry fully. When using ordinary
solvents, the applicable regulations are to be observed (e.g. data
sheet for chlorinated hydrocarbon ZH 1/194)