Gamma Piu X-ERGO Notice D'utilisation Et Garantie page 14

4) While charging, the LED will remain on and turn off once the appliance is fully
charged.
Fully charge the appliance at least once a year.
USE
ATTENTION! Do not use the appliance if the blades of the heads A (fig.1)
are damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
TURNING THE APPLIANCE ON AND OFF
Turning on and off
• Press switch B (fig. 1).
USEFUL TIPS FOR CUTTING
• Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
• After drying, do not use hairspray, mousse or gel.
• Start with the larger size distance comb G (fig. 1), and gradually reduce the size
until you get the desired result.
• For best results, use the appliance against the direction of hair growth.
• If hair starts to clog the adjustable guide comb, remove the comb from the
appliance (see par. "Removing the adjustable guide comb") and clean away
the hair (blow and/or brush it out).
USING THE APPLIANCE
Turn off the appliance before changing or inserting any accessories.
Cutting length adjustment
The cutting length can be adjusted using the special lever (fig. 2).
Using the distance comb
Check that the appliance is off.
Place the comb G (fig. 1) on the cutting edge of the head A (fig. 1) and press it until it
engages the head itself, by applying force towards the handle.
• Turn on the device.
• Cut the hair; for tips see par. "USEFUL CUTTING TIPS".
Removing the distance comb
• Turn off the appliance.
• Unhook the comb from the blade base and slide it off the appliance.
Use without the distance comb
When using the appliance without the spacer comb G (fig.1), the blade
of the head A (fig.1) will cut the hair very close to the skin.
14