LEGRAND LEXIC 036 64 Mode D'emploi page 18

Commissioning
– A la première mise sous tension de l'installation ou The
product is initialised when the installation is first switched
on or after a power break ≥ 200 ms
– On first use, the remote dimmer behaves as follows :
- short press = > maximum lighting level
- long press = > maximum lighting level then decreasing
level of lighting
– For subsequent use, see the description of operation
opposite.
Recommendation
To achieve the same level of dimming at each lighting point, use identical loads
Operation
– The lighting level produced by pressing the key on the
peripheral device or the control pushbutton is as
follows :
- short press = > off (lighting level memorised)
- short press = > on (returns to memorised lighting level)
- long press = > increasing / decreasing variation of ligh-
ting level from the memorised lighting level (direction of
variation reversed on each press)
18