Linksys WAPPOE Mode D'emploi page 7

Product Overview
Splitter's First Side Panel
The Power & Data IN port is located on the Injector's first side panel.
Power&DataIN
to the Injector. (You will use the included Ethernet network
cable to make this connection.)
Splitter's Second Side Panel
The built-in Ethernet network and Power cables are located on the
Splitter's second side panel.
Ethernet OUT
cable. You will connect this cable to the Ethernet network
port of your remotely located access point or other network
device.
Power
this cord to the Power port of your remotely located access
point or other network device.
PowerOverEthernetAdapterKt
This port allows you to connect the Splitter
The Splitter has a built-in Ethernet network
The Splitter has a built-in power cord. You will connect
Chapter