TP-Link TL-MR3420 Guide D'installation Rapide page 8

English
Connect to DSL/Cable/Satellite Modem
1. Connect the hardware
Note:
If your Internet connection is through an Ethernet cable from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet
cable directly to the router's WAN port.
Internet
2. Configure via a web browser
a Connect your device to the router (wired or wireless). The default SSID and password are printed on the
bottom of the router.
6
1
Power off the modem and remove the
backup battery if it has one.
3
Turn on the modem and then wait
about 2 minutes for it to completely
boot up.
2 Connect an
Ethernet cable from
the modem to the
router's WAN port.
4
Press to
turn on
the router.