Pelican Rainbow DLX Instructions D'assemblage page 7

CARE AND MAINTENANCE
The best way to clean your pedal boat is to wash it with lukewarm water and mild soap. Do not use
harsh abrasives. Regular cleaning will keep your pedal boat looking like new. Never attempt to paint
the pedal boat because it will not stick to the hull.
/ Caution must be used if you decide to use a pressure washer to clean your pedal boat.
/ Never use the pressure washer inside your pedal boat as it could damage accessories and stickers.
/ Only use a pressure washer on the hull below the water line.
/ Always use widest setting on the jet spray.
STORAGE
SHORT TERM
/ Pelican offers a mooring cover to protect your pedal boat from all types of weather conditions.
/ The drain plugs at the bow of the pedal boat should be removed periodically in order to allow
any water accumulation caused by condensation to be evacuated. To drain: remove the drain plug
and stand the pedal boat on its bow.
LONG TERM
/ To store your pedal boat for long periods of time, remove the drain plugs and stand the pedal boat
on its bow to remove any water accumulation.
/ Set the pedal boat right side up on the ground with a mooring cover.
/ Avoid placing heavy objects on the pedal boat. If this should happen and the plastic is bent due
to the pressure, place the boat in the sun and the RAM-X™ will return to its original shape.
/ Never store a pedal boat on sawhorses.
/ Avoid prolonged or unnecessary exposure to the sun, as this may damage the pedal boat's finish.
5