WARNING: IMPORTANT INFORMATION FOR THE USER
WARNING
Actuation of your CO alarm indicates the presence of carbon monoxide (CO)
which can KILL YOU.
If alarm signal sounds:
1. Operate reset/silence button.
2. Call your emergency services (fire department or 911).
3. Immediately move to fresh air - outdoors or by an open door/window. Do a
head count to check that all persons are accounted for. Do not reenter the
premises nor move away from the open door/window until the emergency
services responders have arrived, the premises have been aired out, and
your alarm remains in its normal condition.
4. After following steps 1 - 3, if your alarm reactivates within a 24 hour
period, repeat steps 1 - 3 and call a qualified appliance technician (Telephone
Number) to investigate for sources of CO from fuel burning equipment and
appliances, and inspect for proper operation of this equipment. If problems
are identified during this inspection have the equipment serviced
immediately. Note any combustion equipment not inspected by the
technician and consult the manufacturers' instructions, or contact the
manufacturers directly, for more information about CO safety and this
equipment. Make sure that motor vehicles are not, and have not been,
operating in an attached garage or adjacent to the residence.
DETECTOR REPLACEMENT
NOTE:
NOTE:
NOTE:
CAUTION
13. SPECIFICATIONS