Publicité
Installation Instructions
Standard Installation
B
STANDARD INSTALLATION
1.4 cm
(9/16") Min.
Flat
76 cm (29-15/16") – 76.4 cm (30-1/16")
If the construction of your cabinet cannot
provide a 6.3 mm (1/4") flat area at the
back of the countertop opening, consider
changing the countertop to accommodate
this dimension. See Alternate Construction
section. If the area is not flat, excess tension
may be applied to the glass cooktop, causing
breakage and voiding the warranty.
6.3 mm
(1/4") Min.
Flat
58.9 cm
(23-3/16")
(9/16") Min.
Smooth Cut
Wall
63.5 cm (25")
Typically
1.4 cm
Flat
Center the 76.2 cm (30") wide opening
B1
over the adjacent cabinets and mark
with a straight edge.
Using a straight edge, mark the back line
B2
at 58.9 cm (23-3/16") from the front edge
of the counter.
Be careful not to damage the adjacent
B3
cabinets while cutting the countertop.
Use a hand or saber saw to make
straight smooth cuts.
Remove countertop raised edge, if
B4
incorporated. (See illustration on page 5)
6
Flat
Area
R
91.4 cm (36")
6.3 mm (1/4")
Publicité
