PLAN INSTALLATION
LOCATION
DUCTED and NON-DUCTED HOODS
1. Choose a hood location above the
cook top and prepare the wall for
the electrical outlet and mounting
brackets.
2. Mount the hood a minimum of 20" and
a maximum 30" above the cook top
for best capture of cooking impurities.
3. The hood is supplied for non-ducted
installation only. Follow instructions
marked "NON-DUCTED HOODS" .
4. For ducted installations, purchase
Flue Kit Model AEWM43SB and
follow instructions marked "DUCTED
HOODS" .
INSTALL ELECTRICAL
DUCTED and NON-DUCTED HOODS
WARNING : Electrical wiring must
be done by a qualified person(s) in
accordance with all applicable codes
and standards. This range hood
must be properly grounded. Turn off
electrical power at service entrance
before wiring.
1. Plan where the hood will be located
above the cook top. Refer to the
"INSTALL MOUNTING BRACKET"
section for hood mounting height
options.
2. Install a standard 2" x 4" wall outlet
box and 3-blade 125 volt, 15 Amp
grounded receptacle.
3. Mount the center of the wall outlet 3"
to 6" above the bottom of the hood.
Fig. 5.
4. Locate the box and the receptacle
within boundary shown and off center
of the ductwork (to allow for power
cord plug and flue clearance).
ROOF CAP
DECORATIVE
FLUE
HOOD
20" TO 30" ABOVE
COOKING SURFACE
(see "INSTALL
MOUNTING
BRACKET"
section for mounting
restrictions)
C E N
T E R
L I N E
O F H
O O D
- 7 -
6" ROUND
DUCT
WALL CAP
6" ROUND
ELBOW
FIG. 4
8 ½ "
4 ¼ "
3 " t o
6 "
FIG. 5