Prior To Using Your Panini Grill/Griddle; Cooking With Your Panini Grill/Griddle - Electrolux Frigidaire FPPG12K7MS L'utilisation Et L'entretien

1. Carefully unpack the contents from the box. Check
to make sure that all accessories are accounted for
and that the panini grill/griddle and accessories
appear to be free from any damage. If you discover
any damage or missing parts, please contact our
customer service department at 1-888-845-7330
prior to plugging the unit in.
Your panini grill/griddle offers a number of cooking
options to meet your needs. It can be used in the
closed position as a panini press and contact grill or in
the open flat position as a griddle or table-top grill. In
either cooking position, you can use either side of the
grill/griddle plates – smooth or ribbed. You can also mix
and match the grill/griddle plates for even greater
flexibility in food preparation.
To use as a Panini Sandwich
Maker or Press Grill
1. Install both grill/griddle plates with ribbed sides
facing out. Place the panini grill/griddle in the
closed position.
2. Plug in the unit.
3. Adjust the mode control to the desired panini heat
level of Low, Medium, or High. This will control the
temperature of both the top and bottom plates.
4. The ready light will illuminate when the desired
temperature is reached.
5. Open the lid to the upright position, place your
panini sandwich on the grill plate and close the lid.
If desired, use the lid height adjustment to limit how
far down the lid presses (see page 4).
6. When cooked to the desired level, remove your
panini sandwich and enjoy!
Use this same process to grill hamburgers, steaks, and
many other foods. Turn the grill/griddle plates to the
smooth sides to grill flat-iron style steaks, quesadillas,
and much more.
IMPORTANT
Check all meats with a food thermometer to ensure
they are properly cooked.

PRIOR TO USING YOUR PANINI GRILL/GRIDDLE

COOKING WITH YOUR PANINI GRILL/GRIDDLE

2. Remove any printed material or tape from the
panini grill/griddle.
3. Remove, wash, and dry the drip tray and
grill/griddle plates (see Removing and Installing
Grill/Griddle Plates, page 4).
4. Install the grill/griddle plates and drip tray back into
the panini grill/griddle.
To use as a Griddle
1. Install both grill/griddle plates with smooth sides
facing out. Place the panini grill/griddle in the open
flat position. (See Open Flat Hinge Release Button,
page 4)
2. Plug in the unit.
3. Turn the mode control to 'Griddle.'
4. Set both temperature control knobs to the desired
heat, from 150°F to 450°F. The middle knob will
control temperature of the base (front) plate. The
right knob will control the temperature of the lid
(back) plate.
5. The ready light will illuminate when the desired
temperature is reached. If you have set two
different temperatures, the light will turn on when
the hotter temperature is reached.
6. The griddle is now ready to use!
To use as an indoor table-top grill, turn the grill/griddle
plates with ribbed sides facing out. You can also use a
combination of one grill plate and one griddle plate to
suit your particular cooking needs.
WARNING
Electrical Shock Hazard
Plug the unit into a properly grounded electrical outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
5