Olympus P-11 Manuel D'utilisation page 17

3
Insert the ink ribbon cartridge all the way.
Remove the protective material from the cartridge slot and insert the
ink ribbon cartridge.
The RIBBON indicator blinks and an error will be generated if you do
not press from the center of the ink ribbon cartridge to slide it all the
way until you hear a clicking sound.
See page 30. "If an indicator is lit or blinking"
4
Attach the side cover.
See page 14. "Connecting the power supply and turning on/off the
printer"
If the side cover cannot be attached properly, remove the ink ribbon
cartridge and then reinsert it.
Removing the ink ribbon cartridge
Lift up the tab to release the ink ribbon cartridge, and remove the
cartridge.
Loading the ink ribbon cartridge
17