Table Des Matières - Spanset Magnum-x 10.000 Notice D'utilisation

them.
•
Do not use the Magnum-X round sling in a chain sling. The
7
Magnum-X round sling may slide together and the load may
fall.
•
Never simply lay Magnum-X round slings over the crane hook.
8
The Magnum-X round slings may slide and the load may fall.
•
Magnum-X round slings must not be pinched or lie one above
9
another. This will considerably reduce strength.
•
Magnum-X round slings must not be placed against sharp edges,
10
slide over them and/or be pulled across them. The Magnum-X
round sling may be severed and the load may fall down (see the
definition of sharp edge
•
Magnum-X round slings have considerably less working elon-
11
gation than conventional polyester round slings. Jerky lifting
and lowering of the load are therefore prohibited, because force
peaks can overload and break the round slings.
•
During lifting, the load should never get out of control. Swinging
12
or rotating loads may hurt buildings, machines or people, and
components may fall.
•
Magnum-X round sling may take on an electrostatic charge, so
13
their use is forbidden underground and in explosive zones.
Table of Contents
1 Functional description and application
2 Safety instructions and handling
3 Operating Magnum-X round slings
4 Inspection, maintenance, repair and end of use
5 Storage and cleaning
6 Training and important things to know
1 Functional description and application
Magnum-X round slings are intended for slingers (authorized
persons) to use for lifting loads. Magnum-X round slings must be
used as intended. The various SpanSet Magnum-X round slings can
be clearly identified by their sewn label
1
"sharp edge" means when the radius "r" of the transported goods' edge is smaller than or
equal to the thickness "d" of the lifting strap or round sling.
).
1
21
2
Exemplary label
and accompanying do-
2
Page
EN
13