Setting the timer for
automatic programmes
1. Press the Timer button (6).
2. Press the relevant button
(7.8.9.11) to select the
required programme.
3. Set the cooking time as
described above.
Displaying the power
If you press the Voltage button
(2), the total power for the
cooking function will be shown
as "P*,**" on the display. If
you press the Voltage button
again within 5 seconds, the
current operating power will be
shown as "U*.**" on the display.
5 seconds later the display
returns to normal.
Switching the appliance off
Switch the appliance off by
pressing the On/off button (14).
NB! The fan continues to
run for a short time after the
appliance has been switched
off. Only unplug the appliance
once the fan has stopped
so that you are sure that
the appliance has cooled
sufficiently.
UK
TROUBLESHOOTING
In some cases, an error
message may appear on the
display. The table below shows
how the errors should be dealt
with.
Display
Problem
shows...
E0
No or unsuitable
pan on hotplate
E1/E2
Current too low/
high
E3
Circuit error/short-
circuit
E5/E6
Overheating error
E7
Problem with tem-
perature sensor
CLEANING
Always switch off the appliance
at the socket, unplug it and
allow it to cool before cleaning
it.
Clean using a damp cloth
and, if necessary, a little
detergent. If necessary, use
a special cleaning agent for
glass-ceramic hobs. Follow the
instructions on the container.
49