Memory Restore - Factory Parameters; Count - Domus DTA-11 Mode D'emploi

Note: Values below 30 seconds should not be entered.
9.1.10 MEMORY RESTORE – Factory parameters
This option allows you to reset all the changes so that all the values of the
microprocessor are restored to the factory settings. Use the INC () and DEC () keys to
move the cursor from YES to NO or vice-versa, and the SELECT key to confirm the
modification.

9.2. COUNT

With the technician's menu window open, place the cursor over COUNT, and press
SELECT to go to the COUNT menu.
The count menu is shown below, the left column gives the data and the right column
gives the figures for that data.
DRUM TIME
060.
MEMORY RESTORE
YES / NO
TYPE MENU
OPTION
COUNT
EDIT
EXIT
115