Cool Factor; Lost Balance Time; Drum Time - Domus DTA-11 Mode D'emploi

9.1.7 COOL FACTOR

After all the temperature settings have been defined, the cooling time to the end of the
cycle should be configured. The Cool Factor parameter defines the length of this cooling.
The factory setting is 0 but this can be modified. Use the INC () and DEC () keys to
modify the value, and the SELECT key to confirm the modification.
IMPORTANT! THE COOL DOWN MINUTES ARE INCLUDED IN THE SELF-

9.1.8 LOST BALANCE TIME

This parameter defines the time in minutes that the dryer can remain inoperative (fan
not running) before any outstanding balance is lost. The factory value is 0, with this value
this function is deactivated, and therefore the outstanding balance is never lost. To insert a
different value, use the INC () and DEC () keys to modify the value, and the SELECT key
to confirm the modification.

9.1.9 DRUM TIME

This option allows the time in seconds that the programmer waits before changing the
direction of the drum rotation to be adjusted. The value entered remains fixed over time for
all the programmes. To modify the configuration, use the INC () and DEC () keys to
increase or decrease the time and the SELECT key to confirm the change and go to the
next option.
114
COOL FACTOR
001.
SERVICE PROGRAMME TIME
LOST BAL. TIME
000.