How To Run A Drying Cycle Using A Standard Programme; How To Run A Drying Cycle Using The Values Defined By The User - Domus DTA-11 Mode D'emploi

4.6.

How to run a drying cycle using a standard programme

When the machine is in PAUSE mode, press the arrows to select the required programme
number.
When the required programme is displayed, press START/STOP and the required programme
will start.
4.7. How to run a drying cycle using the values defined by the
user
When the machine is in PAUSE mode, press SELECT until 60º (Drying temperature) is
displayed flashing, and use the arrows to change the setting.
Press SELECT again until the drying time, 25' is displayed flashing and use the arrows to change
the time.
Press START/STOP to start the drying cycle.
These values can be also modified while the machine is running.
99