Table des Matières
Publicité
NOTES
Do not use the printer any way other than described here in order to avoid personal injury or property damage.
1
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
2
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
3
Please use recommended resin to in case damage of machine.
4
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
5
Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
6
Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
7
Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
8
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
9
guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
Children under 10 years should not use the printer without supervision.
10
Tips： Do not plug or unplug the power cord when power on.
11
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety
12
obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any circustance.
26
Publicité
Table des Matières
