Publicité
Les langues disponibles
Les langues disponibles
Mounting and Removing Flat Panel Screen
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screen.
Hook adapter brackets (BB) onto wall plate (AA).
3
Then slowly swing screen in as shown. Turn safety
screws, using allen wrench (ee), clockwise at least six
times to prevent screen from being removed as shown
in detail 1 of figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.2.
Note: To lock the screen down, tighten security
screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/security
screws, swing screen away from mount, and lift
screen off of mount.
CAUtIoN
• Do not tighten screws with excessive force. Overtight-
ening can cause damage to mount. Tighten screws to
40 in. • lb (4.5 N.M.) maximum torque.
WARNING
AA
SeCURITy
SCReWS
DetAIL 1
fig. 3.2
8 of 34
BB
AA
BB
fig. 3.1
ISSUED: 11-09-07 SHEET #: 202-9251-3 04-30-09
Publicité
