MT NU 2300
2
Safety Instructions
!
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
• Installation, assembly, and wiring as well as all other work may only be performed by
qualified electrical specialists. Inadequate repairs may cause serious hazards.
Fire hazard
• Installation in potentially explosive areas such as rooms with inflammable liquids or
gases is not permitted.
• Do not install or keep the device near flames or other heat sources (heating, direct
sunlight, gas ovens etc.).
Health hazard
• Always install and keep the device well out of the reach of children.
A
NOTICE! Indicates a situation that, if not avoided, can result in property dam-
age.
• Check that the voltage specification on the type plate corresponds to that of the
energy supply.
• Never immerse the device in water.
• Protect the device and cables against heat and moisture.
• Do not expose the device to rain.
3
Scope of delivery
1
Basic mains priority switch
1
Installation and operating manual
4
Target group
The electrical installation and setup of the device must be performed by a qual-
ified electrician who has demonstrated skill and knowledge related to the con-
struction and operation of electrical equipment and installations, and who is
familiar with the applicable regulations of the country in which the equipment
is to be installed and/or used, and has received safety training to identify and
avoid the hazards involved.
All other actions are intended also for non-professional users.
EN
Safety Instructions
7