LUCCI FIJIAN II Serie Manuel page 8


After completing the electrical connection at the mounting bracket terminal block, connect the
ceiling fan wiring via the quick connector plug.

Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the
canopy and that they are not damaged during this step. Secure the canopy to the hanger bracket
using the screws provided. Fig 10.
LIGHT FUNCTION (Light kit sold separately)
The fan can use with light kit which Beacon lighting provided. Remove the light kit housing
cover and install the light kit to switch housing. For details please refer to light kit installation
guide.
The fan light can be switched ON/OFF via the light switch on the Wall Controller. Fig.11
NOTE: ONLY LIGHT KITS RECOMMENDED BY THE SUPPLIER, WILL BE COVERED UNDER WARRANTY.
FINISHING THE INSTALLATION
8
Fig. 10