Specification And Performance; Guideline Performance Curve - Rutland 504 Installation Et Fonctionnement

Rutland 504 Windcharger

Specification and Performance

Guideline Performance Curve

Note : The curve shown below is for clear, non-turbulent wind conditions; this may not
be achieved in some installations.
performance at your site. Wind speeds are in situ of the Wind charger and may not
reflect those measured at mast top or those reported by the Met. Office.
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
Document No: SB-150 Issue B 17.02.10
WINDSPEED CONVERSION:
MPH = KNOTS x 1.15
M/S = KNOTS x 0.515
5 10 15
W indspeed (Knots)
Refer to the section on Siting to optimise
20 25
15
Installation & Operation
30 35 40
Marlec Eng Co Ltd