Maintenance; Recommendations - Be Cool SUN Instructions

EN

5. MAINTENANCE

Store the harness away and remove the padding.
Take the fabric cover off the headrest.
Unfasten the button and remove the fabric cover
from the lower part of the headrest.
To fit the fabric cover again, follow the same steps in
reverse order.
The safety lock is not working properly if the
following situations occur:
1) When you press the red button it opens slowly
2) It is not possible to insert the metal parts of the sa-
fety lock into the fastener or, when they are inserted
they automatically come loose again.
3) The safety button does not emit the safety click.
4) It is difficult to insert the metal parts into the safety
56
lock.
5) Excessive force is required to open the safety lock.
The 5-point safety harness is very important for the
child's safety. Incorrect use of the 5-point harness
may put the child's safety at risk. Do not use oils or
other lubricants on the safety lock. Defects in the
functioning of the safety lock are usually caused by
inserting foreign objects into the lock.

RECOMMENDATIONS

Check all the parts of the safety seat before using
it. Make sure that it is in good condition as this will
reduce the risk of an accident.
Check that the seat belts are not too loose before use.
Do not expose the safety seat to excessively cold or
hot temperatures, or damp environments.
Keep the instruction manual in a safe place.