UFO Plast DIAMOND Mode D'emploi page 30

Reassembling cheek pads (Fig. 12)
1. Insert the front bayonet cheek pad tab in the appropriate
housing by sliding it in until it stops. (Fig. 12 - A e B)
2. Insert the second tab in the appropriate housing. (Fig. 12
- C and D)
3. Slightly lift the rear protection and attach the button. (Fig.
12 - E and F)
4. Fasten the other 3 internal buttons. (Fig. 12 - G and H)
5. Repeat this operation for the other cheek pad.
Fig.12: Reassembling cheek pads
30
C
F
A
D
G
B
E
H