(C) PACKAGING:
Keeping the equipment in the original packaging is recommended.
(D) EXPIRY:
The expiry date is valid as long as the product has not been removed from the original sealed packaging. If
the filter is not in the original packaging or has not been stored in the conditions indicated, the expiry date for the filter
will vary. Considering that filter saturation is gradual, remember the warning signs: when you notice any characteristic of
the contaminant (taste, smell, itchiness...) with chemical filters and an increase in respiratory resistance with mechanical
filters. The expiry date will only be valid when retailers and users respect the proper storage conditions.
(E) FILTER REPLACEMENT:
First make sure the replacement filter will protect you from the substances present in the
contaminated area. Only use filters in the original and sealed packaging. To remove a saturated filter, twist towards the
left and pull the filter away from the facial adapter. To insert the new filter, position the filter in line with the filter holder
and twist to the right.
Contact Vallfirest to request compatible replacement filters.
8. Warranty
(A) WARRANTY:
Pursuant to the provisions of Regulation (EU) 2016/425 on personal protective equipment and in accor-
dance with the quality controls established as per module C2, Vallfirest Tecnologías Forestales meticulously checks and
verifies all of its garments, components and replacement parts prior to distribution.
Vallfirest protective garments are covered by a two-year warranty as of the date of purchase if there is any type of failure
during use as per the conditions of use detailed in this document.
Officially Approved Center for production control: AITEX 0161.
26