Risk Levels And Protection Classes - Vallfirest Xtreme VFT Manuel D'utilisation

3. Risk Levels and Protection Classes

This product was manufactured following the requirements of Regulation (EU) 2016/425, for basic use pursuant
to EN ISO 13688:2013 (Protective clothing. General requirements), EN ISO 11612:2015 (Protective clothing
against heat and flame), EN 15614:2007 (against thermal risks in wildland fire fighting activities), all applicable,
as stated in the certificate issued by LEITAT - Technological Center, C/ de la Innovació, 2 - 08225, Terrassa (Bcn).
CERTIFYING CENTER 0162
LEITAT - Technological Center, C/ de la Innovació, 2 - 08225, Terrassa (Bcn).
Standards
Textile
EN ISO 11612:2015
Notified body 0162
EN ISO 13688:2013
EN 15614:2007
EN ISO 11612
(The PPE complies with points 5, 6, 7, 8 and 9.1 of
A1, A2, B1, C1, F1
standard EN 15614. For protection compliant with
EN 15614, it must be used along with a complete
suit compliant with this standard).
* The textile mask must be used with the half-mask and filter in order for the certificate to be valid.
EN 15614
Half-mask
EN 140:19998
Notified body 0082
P3 R filter EN 143:2004 + A1:2006
Notified body 0082
ABEK1P3 R filter
EN 14387:2004+A1:2008
Notified body 0082
Protective clothing. Protective clothing against heat and flame.
Protective clothing. General requirements.
Protective clothing for firefighters. Laboratory testing methods
and requirements for forestry clothing.
Respiratory protection equipment. Half-mask.
Respiratory protection equipment. Filters against particles.
Respiratory protection equipment. Filters against gases and
combined filters.
EN
19