Harmony DEFENDER 360 Manuel D'instructions page 25

All UAS seating positions have top tether anchors. Check
your vehicle owner's manual for top tether anchor
locations. If your vehicle is not equipped with a top
tether anchor, it may be possible to have one installed.
Contact your vehicle dealership or a certified mechanic
for the proper anchor location and installation.
Your vehicle's top tether Anchor
Points may be identified using
one of these symbols:
• Check that the top tether is securely attached to the
child restraint.
• Fasten top tether clip to anchor point ensuring the clip
is facing downwards and the strap is not twisted ❶.
• With the child restraint installed with the UAS or
vehicle seat belt, tighten the top tether strap securely
by pulling on the free end of the top tether strap ❷.
• To loosen, press the top tether release button ❸.
❶
! WARNING: Ensure that tether strap is NOT twisted.
❷
❸
24