Huffy Storage Trike Manuel Du Propriétaire page 9

C
F
B
D
Assembly - Snap-Down Collar
G
E
!
G
A
See Torque Table for Recomended Torque
STEPS:
D
1. Ensure Fender
shown.
2. Slide the Fork assembly into the Frame
B
.
NOTE:
Ensure frame is right-side up (Seat
Bracket is facing UP).
!
3. Place Cap C onto Handlebar
4. Make sure Washer
A
Tube .
5. Install Handlebar
screw holes are aligned.
6. Install Hardware
and Fork holes. Tighten securely.
C
7. Slide Cap down until the tabs snap in
place.
CAUTION:
• Ensure Handlebars and Fork turn smooth-
ly in both directions and are not loose.
• Ensure front Wheel and Pedals rotate
smoothly.
A
is over the fork
E .
F
is in place over Fork
E A
into Fork so that
G
through Handlebar
as
9