ASROCK ALiveDual-eSATA2 Guide D'installation Rapide page 22

How to install eSATAII?
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_2; see p.2 No.10) and the eSATAII connector
(eSATAII_TOP; see p.2 No.34) with a SATA data cable first.
Connect the SATA
data cable to the
orange SATAII
connector
(SATAII_2)
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield according to the eSATAII connector that you connect the SATA
data cable.
Connect one end of the eSATAII
device cable to eSATAII device
2 2 2 2 2 2
2 2 2 2
ASRock
SATAII_2
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
ALiveDual-eSATA2 Motherboard
eSATAII_TOP