Setup; Setup Location Requirements; Electrical Connection - CASO DESIGN BG 2000 Mode D'emploi

Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.

12.5 Setup

12.5.1 Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 The appliance must be positioned on a solid, even, horizontal and heat-resistant base
with sufficient load-supporting capacity for the appliance itself plus the heaviest
anticipated cooking contents.
 Select an installation location where children cannot reach the appliance's hot surface.
 Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
 Do not use the appliance near flammable materials such as curtains, kitchen towels,
wooden surfaces, etc.
 During operation of the appliance, there needs to be sufficient area for air circulation
above the appliance and on all its sides.
 Do not use the appliance outdoors.
 The device is not intended to be installed in a wall or a built-in cupboard.
 The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
 The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.

12.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
Caso Kontaktgrill BG 2000 33