Samsung POWERbot SR2AJ90 U Serie Guide D'utilisation page 35

Information codes
Sr2aJ90✴✴W Series
Information codes
foreign matter accumulated on the cliff sensor.
fTurn off the emergency switch and clean the cliff sensor with a soft
cloth.
the poWerbot is caught, stuck or trapped while
moving around.
fTurn off the emergency switch and move the POWERbot to another
area.
foreign matter caught in the power brush.
fTurn off the emergency switch and remove the foreign matter from the
Power brush.
foreign matter caught in the left Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
foreign matter caught in the right Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
fTurn off the emergency switch and turn it back on.
fWhen information code does not disappear, check if there's any small
foreign matter between the bumper and the main body. If there is, pull
the bumper slightly and remove the foreign matter.
foreign matter accumulated on the obstacle sensor.
fTurn off the emergency switch and clean the front and rear sensor
with a soft cloth.
foreign matter accumulated on the cliff sensor.
fTurn off the emergency switch and clean the cliff sensor with a soft
cloth.
ENGLISH-35
checklist
checklist