Publicité
Les langues disponibles
Les langues disponibles
Important Safety Information
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
Electric shock and fire hazard:
•
Do not expose this unit to rain or moisture.
•
Do not use the unit if it is wet or damaged.
•
Use test leads or accessories that are appropriate for the application. Refer to the category and
voltage rating of the test lead or accessory.
•
Inspect the test leads or accessory before use. They must be clean and dry, and the insulation
must be in good condition.
•
Use this unit for the manufacturer's intended purpose only, as described in this manual. Any other
use can impair the protection provided by the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
•
Verify that the unit is not in hold mode before making a measurement.
•
Do not apply more than the rated voltage between any two input terminals, or between any input
terminal and earth ground.
•
Do not contact the test lead tips or any uninsulated portion of the accessory.
Failure to observe these warnings could result in severe injury or death.
4
Publicité
