Gima 1025A Mode D'emploi page 4

1 ABOUT THIS MANUAL
This manual shall only be used for the reference of operation of this particular model. If the manual is used for other purposes, the manufacturer will not undertake
any according consequences and responsibility.
All information of this manual shall be protected by copyright and shall not be copied and translated in any part of this specification without the written consent of
manufacturer.
2 WARNING
• Do not stand on the product.
• Do not allow children play with the product.
• Do not place the equipment in damp places such as bathroom, do not expose to direct sunlight.
• Do not use this product in the places where you are painting/spraying paints.
3 PRECAUTIONS
• Operators should use this product in strict accordance with the instructions, and save this manual for future reference.
• Comply with safe operating procedures, do not overload. Make sure the components of the product are in good condition, eliminate the unsaft factors.
• Tighten the casters, backrests, and the seat regularly, to avoid malfunctions caused by loose or falling parts.
• This product must not be used under faults. When abnormal phenomena or abnormal sounds are found, please check about it immediately. Use after problem
solved.
• Operator should be familiar with the precautions described in each chapter of the product manual to ensure personal and product safety.
• Please place the equipment on a level ground.
• If the casters are damaged, please replace them before use.
• After each treatment, use a neutral reagent to remove the dust and stains on the leather and wood.
• Put the product to a proper location, according to the overall layout, the daylighting or artificial lightings and operation condition of the working environment. And
keep it in the clean, dry and cool environment.
4 ASSEMBLY AND OPERATION
1. Put the product to a proper location, according to the overall layout, the daylighting or artificial lightings and operation condition of the working environment. And
keep it in the clean, dry and cool environment.
2. Open the packing carton to check if the bed is intact and whether the accessories or spares are complete. Please contact distributor or us if there's any problem.
3. Installation
This product graphic is only for display, the specific product structure please refer to the actual product
INSTALLATION PROCEDURE
OPERATION INSTRUCTIONS
ENGLISH
4