Overview Of The Components - AEG MPS 4920 Mode D'emploi

• Do not use any mains adapter other than the
one supplied.

Overview of the Components

1 Nail cleaner
2 Power adapter / charger
3 Nail brush
4 Grinding cone, pointed (for treatment of toenail edges)
5 Grinding cone, blunt (for treatment of toenail edges)
6 Cuticle lifter
7 Charging indicator lamp
8 Socket for mains adapter
9 Motor unit
10 Switch for clockwise / anticlockwise rotation 0-1-2
11 Nail file disc, fine (for fine filing of thick and hard nails)
12 Nail file disc, coarse (for coarse filing of thick and hard nails)
13 Grinding cone, big (for coarse treatment of toenails)
14 Calluses file disc (for quick removal of hard calluses)
15 Polishing disc (for final polishing of nails)
16 Polishing fleece (for final polishing of nails)
Instructions for Use
• This device is only intended for treating hands (manicure) and feet (pedicure).
• Do not use the device on cracked skin or open wounds!
• Do not use on birthmarks.
• Consult your doctor first in case of diabetes, hemophilia, or immunodeficiency.
• Regularly check the results during use in order to avoid injuries. This especially applies
for people with diabetes, since they are less sensitive to pain on hands and feet.
• Excessive use can cause skin irritations. In such a case, stop using the device until any
redness has disappeared.
• Do not apply too much pressure. Guide the attachment with slight movements around
the spot to be treated.
• Always work very carefully!
• Pay attention to any accumulation of heat, e.g. when filing callus on feet. This especially
applies to people who are not sensitive to heat.
English
43