Overview Of The Components - AEG MPS 4920 Mode D'emploi

40
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the machine:
This warns you of dangers to your health and indicates possible injury risks.
NOTE: This highlights tips and information.
Special safety notes
• This unit is only suitable for fi ling and polishing fi ngernails and toenails.
• Do not use this appliance for more than 20 minutes at a time. Being the
using the appliance again let it cool for 15 minutes.

Overview of the Components

1 Mains adapter / charging unit
2 Nail pusher
3 Nail brush
4 Conical fi le, pointed (for the corners of toenails)
5 Conical fi le, blunt (for the corners of toenails)
6 Device to push back the skin from the nails
7 Drive unit
8 Switch, clockwise/anticlockwise running 0-1-2
9 Nail fi ling disc, fi ne (for the fi ne fi ling of thicker and harder nails)
10 Nail fi ling disc, coarse (for the rough fi ling of thicker and harder nails)
11 Conical fi le, large (for the rough fi ling of toenails)
12 Filing disc for callouses, coarse to quickly remove hard skin and callouses)
13 Polishing disc
14 Polishing disc, smooth
Starting up
• Charge the battery in the drive unit See "Charging the battery").
05_MPS 4920 AEG.indd 40 05 MPS 4920 AEG.indd 40
English
WARNING:
CAUTION: This refers to possible hazards to the machine or other objects.
(
05.09.2008 12:13:48 Uhr 05.09.2008 12:13:48 Uhr