LC-POWER LC-M40-UWQHD-144 Mode D'emploi page 16

2. Take off the upper cover of poly dragon, take out the fuselage from the
plas�c bag, and place it in the lower cover cavity of poly dragon again.
3. remove the hanging decora�ve cover from the inside of the a�achment,
lock the M4 thread hole in the middle of the shell with the 4 PM4*16 screws,
and lock it with a screwdriver (for example, the green representa�ve stud).
Wall mounted decora�ve cover
Five PM4*16 screws,
including one spare part
4. Do not touch the screen directly with hands during opera�ng wall mount.
Wall
support
styrofoam underneath
Monitor
Wall Wall
Eng-6
Monitor
The wall mounted adapter is assembled
in the middle of the whole machine
(fixed with PM4*16 screws in the accessory package)
styrofoam underneath
Monitor