Télécharger Imprimer la page

Cooper Lighting LED120 Directives D'installation page 4

Publicité

Les langues disponibles

Les langues disponibles

HOW TO OPERATE YOUR FIXTURE
1.
Depress switch in the handle one time to turn on the floodlight LED lights.
2.
Depress switch a second time to turn the floodlight off and the spotlight on.
3.
Depress the switch a third time to turn both the floodlight and spotlight on.
4.
Depress the switch a fourth time to turn both lights off.
RECHARGING UTILITY LIGHT
1.
Turn off fixture. Remove cap on the bottom of the worklight handle.
2.
When charging with AC adapter, insert the battery charger plug into the jack on
the worklight handle and the other end into a standard 110-120V AC outlet.
3.
When charging with DC adapter, insert the battery charger plug into the jack on
the worklight handle and the other end into a standard 12-volt DC outlet.
Notes: Batteries will reach full charge in about 2 hours. LED indicator light
glows red while the batteries are charging. When the light is fully charged, the LED
indicator turns to green.
HANGING UTILITY LIGHT
• Hanging hook can rotate 360°.
• Magnet rotates 360° for attachment to vertical metal surfaces. Clings to most
metal surfaces.
WARNING: Do not use magnet for horizontal overhead mounting.
CAUTION: Do not slide on finished painted surfaces as magnet may
scratch finish.
MAINTENANCE
Note: Before performing any maintenance, ALWAYS unplug worklight.
• Remove dirt and grime as soon as it accumulates. Use a soft, damp cloth and a
mild soap, if needed. Be sure not to get the electrical plug wet.
• NEVER submerge any part of the worklight in any solution to clean it.
• DO NOT USE solvents such as gasoline, turpentine, etc. to clean unit.
• Aerosols and other chemicals may fog the clear polycarbonate lens.
ONE-YEAR FULL WARRANTY
Cooper Lighting, LLC ("the Company") warrants this product ("the product") against
defects in material or workmanship for a period of one year from date of original
purchase, and agrees to repair or, at the Company's option, replace a defective
product without charge for either replacement parts or labor during such time.
This does not include labor to remove or install fixtures.
This warranty is extended only to the original purchaser of the product.
A purchasers receipt or other proof of date of original purchase acceptable to the
Company is required before warranty performance shall be rendered.
This warranty only covers product failure due to defects in materials or
workmanship which occurs in normal use. It does not cover the bulb or failure of
the product caused by accident, misuse, abuse, lack of reasonable care, alteration,
Call for customer service and/or missing or damaged parts (800-334-6871)
4

Publicité

loading

Produits Connexes pour Cooper Lighting LED120