Overview; Rating Plate; Operation And Handling; Before First Use - CASO DESIGN VAKO2 Mode D'emploi

15 Operation and Handling

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages.
► Do not leave the appliance unsupervised during operation.

15.1 Before first use

Fill the device with water up to the maximum water level. Boil the water and let the device
cool down. Discard the water. Repeat this.

15.2 Use

Remove the pot from the base and open the lid. Fill water into the pot.
► Do not fill the pot over maximum level as water may spout when boiling. Make sure the
lid is firmly closed before you place it on the base again.
Place the device on the base and connect to suitable power supply.
Press on/off-button. The button will light up to show that the device is heating up. The light
will switch off when boiling has finished. The device switches off automatically.
Warning
Please note

14.1 Overview

1. spout opener
2. on/off button
3. handle
4. base with power cord
5. pot
6. spout
7. lid

14.2 Rating plate

The rating plate with the connection
and performance data can be found
beneath the device.
29