Publicité
Les langues disponibles
Les langues disponibles
FOLD / UNFOLD
21) • Release the folding latch, which is
located on the right side (Fig. 21a).
• Lift up on the stroller handle with both
hands until the stroller frame is locked
in the open position (Fig. 21b). The
stroller has spring-loaded latches
on both sides of the frame. Test that
both latches are fully engaged prior to
placing child in the stroller.
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL
INSTALLATION
WARNING:
check the double nut locking
system before each use to
ensure that the front wheel
is securely fastened to the
frame.
15
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ALWAYS
22) • Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig.
22). The wheel should not be loose or
come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
23) • Remove footrest to access nut. You can
use a standard crescent, box, or open-
Fig. 21a
end wrench to tighten the nut (Fig. 23).
DO NOT OVER TIGHTEN this can
cause damage to the wheel housing.
FENDER
If adjustment or replacement is necessary:
24) • Line up the front fender and press onto
the front frame assembly (Fig. 24a).
Fig. 21b
• Insert the 4 screws through the
underside of the front frame assembly
into the front fender's plastic tubes.
Tighten the screws only until snug
(Fig. 24b).
DO NOT OVER TIGHTEN.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
Fig. 22
Fig. 23
16
Publicité
