Télécharger Imprimer la page

Baby Trend XCEL-R8 Jogger Manuel D'instruction page 5

Masquer les pouces Voir aussi pour XCEL-R8 Jogger:

Publicité

Les langues disponibles

Les langues disponibles

SAFETY
NOTE: Check that tray release button
comes through and securely latches the
tray in place.
• To access the child seat: Press inward
on left side tray release button and
rotate upward on the tray (Fig. 10c).
• To remove the child tray: Press the
release button and rotate the tray 180
degrees and pull the tray until it is
released (Fig. 10d).
BRAKES
WARNING:
set brakes when the stroller
is not being pushed so
that the stroller will not roll
away. NEVER leave stroller
unattended on a hill or
incline as the stroller may
slide down the hill.
11) • Locate the 2 rear brakes behind the
stroller on the right and left of the axel
(Fig. 11).
7
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Always
12) • To engage brakes, apply downward
pressure to the brake levers located on
the rear axle. The stroller may require
forward or rearward movement in order
to engage the brake (Fig. 12).
NOTE: Check that the stroller will not
move once the brakes are properly
applied.
Fig. 10b
• To release, gently lift up on the brake
levers.
FRONT WHEEL LOCK
WARNING:
lock the front swivel wheel
in STRAIGHT position
before placing or removing
your children from the
Fig. 10c
stroller and when walking
fast or jogging.
FALL HAZARD:
From tip over before
running, jogging, or walking
fast, lock the front wheel
from swiveling.
13) • The front wheel is equipped with a
Fig. 10d
swivel locking device. Push the button
on the wheel upward to engage the
lock and push downward to disengage
the locking device (Fig. 13).
Fig. 11
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Always
Lock
Unlock
Fig. 12
Fig. 13
8
8

Publicité

loading

Ce manuel est également adapté pour:

Jg95 c serie