Publicité
User Manual
Introduction
Thank you for purchasing the LINDY Fibre Optic HDMI Hybrid Cable. This Cable allows you to transmit
HDMI signals up to a distance of 150m. This cable is a hybrid cable containing both fibre optic and
copper cores.
For long distances of up to 300m the LINDY HDMI fibre optic extender No.38003 may be used, for even
larger distances up to 700m the fibre optic extender No.38063.
Package Contents
LINDY HDMI Hybrid cable
2x Multi-Country Power Adapter (5VDC, 1.2A) with adapters for EURO, UK, US, AUS/CN
This User Manual
Features
Suitable for use with Computer, Home Theatre, Video Wall and professional equipment
Supports HDMI resolutions up to Ultra HD 4K (3840x2160) 60Hz, Including 1080p 3D
Supports colour depth up to 16 bit
Supports lossless HDMI audio formats like Dolby True HD and DTS-HD
Available in lengths from 20m up to 150m
Total Bandwidth 10.2Gbit/s
Installation
This cable can only be used in one direction. The connector to be plugged into the HDMI source is
labelled SOURCE.
The connectors include opto-electronic transceiver chipsets that require power. In many cases the
power can be provided from the connected HDMI device. In all other cases as well as to assure a
higher level of reliability, the supplied power supplies must be connected to the HDMI connectors.
Connect the cable to the devices and power on your display and source to complete the installation
The minimum bending radius of the hybrid cable is approximately 8cm; never bend the cable to a
smaller radius because this would irreversibly destroy the cable.
Never step on the cable or put any heavy pressure on to the cable
The maximum tensile load to the cable is 245N. Never pull the cable with higher load.
English
Publicité
